JY9058 BrightHigh- Elasticity Foil-printing Resin
Type of Adhesive:Hot Stamping Adhesive(Coating on film)
Suitable Fabrics
Viscosefabric, Nylon Fabrics, Kitted Fabrics, Chemical Fiber Fabric, Cotton Fabrics,etc
Properties
JY9058bright high-elasticity foil-printing resin, has high solid components,brightness, good fastness. It perform good softness, fast-drying, normalwashable.
Verysuitable for the manufacturing of sofa fabrics, curtain fabrics, etc.
Typicalspecification
|
| Item |
|
|
| JY9058 |
| Appearance |
|
| Slightly yellow transparent liquid |
|
|
|
|
|
|
| Solid Content (%) | 70 |
|
|
|
|
|
|
| Tensile Strength ( kg/cm2 ) | 300-500 |
| Viscosity (CPS/25 | )℃ | 80000-100000 |
|
|
|
|
|
|
|
| Elongation (%) |
|
| 500-800 |
|
| Solvent |
|
| TOLUENE / MEK |
|
|
|
|
|
|
|
| Shelf Life |
|
|
| 12 months |
|
|
|
|
|
|
|
Recommended Formulation |
|
|
|
|
|
| FULL |
| DESIGN |
|
|
|
|
|
|
|
|
| JY9058 |
| 100 |
| 100 |
|
|
|
|
|
|
|
|
| Hardener(SA-75) |
| 15 |
| 25 |
|
|
|
|
|
|
|
|
| Brighter(SA-90) |
| 10 |
| 5 |
|
|
|
|
|
|
|
|
| MEK |
| 100 |
| 110 |
|
|
|
|
|
|
|
|
Accordingfabric necessary adjustments to your viscosity
40℃ for the dryer and cylinder120℃,keep warm50℃ for 10-14hours after foil-bonding, then separate the foil.
Package
JY9058Bright High-Elasticity Resin is 200kg / drum
Storage
The adhesive have a shelf life of 12 months at a room temperature whenstored in the original unopened containers. Once opened, containers shall beclosed tightly again and the material should be consumed within a short period.
Attention
Please wear gloves when using, because contacting with heated productsmay cause burns. The product contains isocyanate, please avoid contacting withskin and eyes. Avoid prolonged or repeated contact with steam. Do not swallow,it is harmful. If eye contact, rinse the eyes with water for 15 minutes, andnotify the doctor. If you have skin contact, wash the skin with soap. If youhave allergies or skin rash, consult doctor. If inhaled, move to fresh air.
